Konfigurasi Fram Relay Sederhana dengan Cisco Packet Tracert

Get paid to share your links!

==============================================Router 1===============================================

Router(config)#interface serial 0/0/0

Router(config-if)#description link to Frame Relay Network

Router(config-if)#ip address 10.1.1.1 255.255.255.0

Router(config-if)#frame-relay map ip 10.1.1.2 102 broadcast

Router(config-if)#frame-relay map ip 10.1.1.3 103 broadcast

Router(config-if)#frame-relay lmi-type ansi

Router(config-if)#end

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config)#

Router(config)#router rip

Router(config-router)#version 2

Router(config-router)#network 10.1.1.0

Router(config-router)#end


============================================ Router 2 ================================================

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface Serial0/0/0

Router(config-if)#ip address 10.1.1.2 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#exit

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface serial 0/0/0

Router(config-if)#description Link to Frame Relay

Router(config-if)#ip address 10.1.1.2 255.255.255.0

Router(config-if)#encapsulation frame-relay

Router(config-if)#frame-relay map ip 10.1.1.1 201 broadcast

Router(config-if)#frame-relay lmi-type ansi

Router(config)#exit

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config)#router rip

Router(config-router)#version 2

Router(config-router)#network 10.1.1.0

Router(config-router)#default-information originate

Router(config-router)#no auto-summary

Router(config-router)#end


================================================== Router 3 ==========================================


Router(config)#interface serial 0/0/0

Router(config-if)#ip address 10.1.1.3 255.255.255.0

Router(config-if)#encapsulation frame-relay

Router(config-if)#frame-relay map ip 10.1.1.1 301 broadcast

Router(config-if)#frame-relay map ip 10.1.1.2 302 broadcast

Router(config-if)#frame-relay lmi-type ansi

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit

Router(config)#router rip

Router(config-router)#version 2
   
Router(config-router)#network 10.1.1.0

Router(config-router)#end

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#router rip

Router(config-router)#version 2

Router(config-router)#network 10.1.1.0

Router(config-router)#no auto-summary

Router(config-router)#exit



jika ada yang kurang silhakn di tambahkan menurut kreasi anda masing - masing.
Clik disini -- Macam - Macam Routing